Bogen QUANTUM VOIP series - Page 20

8-18
Software Update
4. The Software Download screen (Figure 5-23) will
then open. Click Browse.
(Fig. 5-23)
5. Locate the folder that contains the VoIP Speaker
software (Figure 5-24) . Select the file named:
ipspkr_x.x.x.tar.gz and Click Download to
initiate the software download to the VoIP
Speakers.
(Fig. 5-24)
6. When the download is complete, an Alert box (Figure 5-25)
will open stating FTP Success.
After the software download has completed, click on Reboot
in the VoIP Speaker Configuration window (Figure 5-22) .
The VoIP Speaker will install the new software during reboot.
(Fig. 5-25)
3. After entering the Username and Password,
click Submit. The VoIP Speaker Configuration
window (Java-applet) will open
(Figure 5-22) .
Click Software Download.
(Fig.5-22)
NOTE: The x.x.x represents the VoIP Speaker
version number.
✍