8-11
How To Un-Configure a VoIP Speaker
How To Un-Configure
a VoIP Speaker
3
To un-configure a VoIP speaker, follow these steps:
1. Un-configure a VoIP speaker from Quantum Commander by
changing its station type to “n/c”.
2. Discover VoIP Speakers using the VoIP Speaker Locator applica-
tion. See
Section 1.1, Configure IP Address Information
.
3. Un-configure Primary Quantum IP address from the VoIP Speaker
by setting its Primary Quantum IP address to 0.0.0.0
4. Now the VoIP Speaker can be reconfigured using a DHCP or static
IP Address.
✍
To Next Page
Loading...
