K Series
© Böhmer-AG
10
English
Fuel lter
Air lter
1. Switch off the fuel tap.
2. Remove sediment cup and ltering mesh.
3. Clean sediment cup and ltering mesh
4. Install sediment cup and ltering mesh.
The air lter is installed on the intake system of the engine. It allows clean air to ow into the engine to
provide the correct air/fuel mixture.
To check/clean
1. Open air lter cover
2. Check air lter to ensure it is free of dirt build-up
3. If dirty, remove lter and clean with a solvent cleaning solution
4. Squeeze to remove water and allow to dry
5. Add a few drops of oil
6. Squeeze tight to distribute oil and remove any excess
7. Install air lter and cover
To Next Page
Loading...
