How to pair BOLTUNE Headphone if pairing failed?
If your BOLTUNE Headphone earbuds aren't pairing with your device, first ensure that the device is turned on and its Bluetooth function is activated. If that doesn't work, put the earbuds into pairing mode following the instructions in the "Pairing" section.
What to do if my BOLTUNE Headphone earbuds fail to pair with my device?
If your BOLTUNE Headphone earbuds are failing to pair, first ensure that your device is turned on and its Bluetooth function is activated. Then, bring the earbuds into pairing mode as instructed in the 'Pairing' section.
Why my BOLTUNE BT-BH020 has unstable connection?
An unstable connection with your BOLTUNE Headphone may occur if there are obstacles that shorten the effective distance. Also, try turning off other Bluetooth devices to reduce interference.
What to do if BOLTUNE BT-BH020 Headphone has poor sound quality?
If you're experiencing poor sound quality with your BOLTUNE Headphone, try the following: * Ensure you're wearing the earbuds properly and keep them close to each other. * Place the connected device closer to the earbuds, removing any obstacles. * Clear any debris from the earbuds.
Why is the connection unstable on my BOLTUNE BT-BH020 Headphone?
An unstable connection with your BOLTUNE Headphone can occur if there are obstacles in the way, which shortens the effective distance. Try removing any obstacles. Also, interference from other Bluetooth devices can cause connection issues. Turn off other Bluetooth devices to decrease the interference.
How to fix BOLTUNE Headphone earbuds that fail to charge?
If your BOLTUNE Headphone earbuds aren't charging, ensure that you place the earbuds into the charging case properly. Also, make sure the charging case is fully charged.
How to fix BOLTUNE BT-BH020 Headphone earbuds that fail to turn on?
If your BOLTUNE Headphone earbuds are not turning on, it's likely due to a low battery. Please charge them.
What to do if BOLTUNE Headphone failed to charge?
If your BOLTUNE Headphone earbuds aren't charging, make sure that you place the earbuds into the charging case properly and ensure the charging case is fully charged.
What to do if there is no sound in one of the BOLTUNE BT-BH020 earbuds?
If you're not getting sound in one earbud of your BOLTUNE Headphone in couple earbuds mode, place both earbuds back into the charging case and then take them out; they should pair automatically. If pairing fails, restore them to factory settings as instructed in the "Clear Pairing List" section.
What to do if BOLTUNE BT-BH020 Headphone charging case doesn’t charge?
If the charging case for your BOLTUNE Headphone isn’t charging, ensure the charging cable is intact and properly plugged in.
Select ear tips of appropriate size for a comfortable and secure fit.
Proper method for wearing the earbuds for optimal performance and comfort.
Advice on maintaining stable Bluetooth connection and avoiding interference.
Instructions on how to place earbuds in the charging case for charging.
Steps to connect the charging case to a power source for charging.
How to automatically power the earbuds on and off using the charging case lid.
How to pair and use both earbuds simultaneously with a device.
Instructions for using only one earbud with a device.
Steps to reset earbuds to factory settings by clearing pairing history.
General| Bluetooth Version | 5.0 |
|---|---|
| Battery Life | 30 hours |
| Charging Time | 2 Hours |
| Charging Port | USB-C |
| Driver Size | 40 mm |
| Model | BT-BH020 |
| Type | Over-Ear |
| Impedance | 32 ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Microphone | Yes |
| Water Resistance | No |
| Noise Cancellation | Yes |
To Next Page
