Bomag BPR 25/32 - Page 12

7HFKQLFDO'DWD
%20$* 12 BPR 25/32 - BPR 25/40
The following noise and vibration values according to the EC-machine regulation of revision (93/68/
EEC) have been measured under typical operating conditions for this machine over a specified travel
distance (DIN 45635).
During operation these values may vary because of the existing operating conditions.
Noise values
The sound level according to enclosure 1, paragraph 1.7.4. f of the EC-machine regulation is
Sound pressure level at the place of the operator:
L
pA
= 91,3 dB(A)
Sound capacity level:
L
pA
= 104,5 dB(A)
These sound values were determined according to ISO 3744 for the sound capacity level (L
WA
) and ISO 6081
for sound pressure level (L
pA
) at the place of the operator.
Vibration values
The vibration values according to enclosure 1, paragraph 2.2 or 3. 6. 3. a of the EC-machine regulation are:
Hand-arm-vibration values
The weighted effective acceleration value determined according to ISO 8662 part 1, DIN 45675, part 9 is
4,5 m/sec
2
.
Go to Discount-Equipment.com to order your parts