Bomag BPR 55 D - Annual Maintenance; Changing the Engine Oil and Cleaning the Oil Filter

6.9 Annual maintenance
6.9.1 Changing the engine oil and cleaning the oil filter
Change the engine oil at the latest after 250 operating
hours.
NOTICE!
Danger of engine damage!
– Change the oil only with the engine at operating
temperature.
– Use only oil of the permitted specifica-
tion
Ä Chapter 6.2.1 ‘Engine oil’ on page 50.
– Filling quantity:
Ä Chapter 6.3 ‘Table of fuels and
lubricants’ on page 53
Protective equipment:
n
Working clothes
n
Protective gloves
n
Safety goggles
Park the machine in secured condition.
Clean the area around the dipstick and pull the dipstick out.
Clean the area around the drain hose.
Loosen the hose clamp (1) and route the drain hose to the
outside.
WARNING!
Danger of burning on hot components!
– Wear your personal protective outfit (protec-
tive gloves, protective clothing).
Unscrew the oil drain plug (2) and catch any oil running out.
Clean the drain plug and screw it back in.
Assemble the drain hose with the hose clamp.
Draining off engine oil
Fig. 59
Maintenance – Annual maintenance
BPR 50/55 D / BPR 60/65 D
68
Go to Discount-Equipment.com to order your parts