Fault Possible cause Remedy
Engine overheating Lack of cooling air Clean cooling air inlet and cooling
fins
Function of injection system not
correct
Have examined by a specialist
Too much oil in crankcase Drain the oil down to the MAX-
mark on the dipstick
Engine stops Fuel tank empty Fill in fuel
Fuel filter clogged Check the fuel filter, replace if
necessary
Tank ventilation blocked Check the tank ventilation
Air in the fuel system Check the fuel system for air
Check the bleeding valve
Engine runs with high speed, but
no vibration
Centrifugal clutch defective Change the centrifugal clutch
V-belt Check tension, replace if neces-
sary
Trouble shooting – Engine problems
BPR 50/55 D / BPR 60/65 D
84
Go to Discount-Equipment.com to order your parts
To Next Page
Loading...
