BOMANN GSP 855 - Starting a Rinse Program

13
Starting a Rinse Program
Starting a Rinse ProgramStarting a Rinse Program
Starting a Rinse Program
Rinse cycle table
Rinse cycle tableRinse cycle table
Rinse cycle table
Select a suitable program depending on dishes and degree of soiling.
Pr
PrPr
Pro
oo
ogram
gramgram
gram Program
ProgramProgram
Program information
informationinformation
information Program
ProgramProgram
Program sequence
sequencesequence
sequence
Detergent
Detergent Detergent
Detergent
pre/main
pre/mainpre/main
pre/main (g)
(g)(g)
(g)
Time
TimeTime
Time
(Min)
(Min)(Min)
(Min)
Energy
EnergyEnergy
Energy
(kWh)
(kWh)(kWh)
(kWh)
Water
WaterWater
Water
(l
(l(l
(l)
))
)
Rinse
Rinse Rinse
Rinse
aid
aidaid
aid
Intensive
heavily soiled dishes and
dried leftovers
Pre-rinse (50°C)
Main rinse (60°C)
Rinse 1
Rinse 2
Rinse 3 (70°C)
Drying
5/22
(or Tab)
165 1.4 16.5
ECO
ECOECO
ECO
(*EN 50242)
standard program for
normally soiled dishes,
daily use
Pre-rinse
Main rinse (45°C)
Rinse (65°C)
Drying
5/22
(or Tab)
190 0.77 9
90 Min
for lightly soiled dishes
Main rinse (65°C)
Rinse 1
Rinse 2 (65°C)
Drying
27
(or Tab)
90 1.15 11.5
Rapid
rapid rinse cycle for light-
ly soiled dishes without
drying
Main rinse (45°C)
Rinse 1 (50°C)
Rinse 2 (55°C)
20 30 0.7 10
NOTE
NOTENOTE
NOTE:
::
:
• The extra addition of rinse aid can improve the drying result.
• *EN 50242: this program is the test program and of combined energy and water consumption most efficient.
The information for comparability: Capacity: 9 settings; Position of the upper basket: upper wheels on rails;
Rinse aid setting: 6
Control panel
Control panelControl panel
Control panel
1
11
1 POWER- button: to switch on/off the power supply. The power control lamp shows the power supply.
2
22
2 Program sequence indication: shows the program status, Pre-rinse->Main rinse->Rinse->Drying.
3
33
3 Rinse aid warning lamp: lights up when the rinse aid dispenser needs to be refilled.
4
44
4 Salt warning lamp: lights up when the salt container needs to be refilled for water softening.
5
55
5 Program selection switch: to select the rinse program. The program control lamp indicates the selection.
6
66
6 START/PAUSE- button: to start/pause the selected or running program.
Program control lamp is lighting: operation Program control lamp is flashing: pause