Boneco H320 - Factory Default Settings; About the Factory Default Settings; Resetting the Appliance

26
en
FACTORY DEFAULT SETTINGS
ABOUT THE FACTORY DEFAULT SETTINGS
If your BONECO appliance control system is not func-
tioning the way you are expecting, or if you would
like to delete all adjustments, you can reset the ap-
pliance to the factory settings. This deletes all ad-
justments and settings.
After the reset, the BONECO appliance has to
be paired with the smartphone again so that
the control system can continue working with the
app (see page16).
RESETTING THE APPLIANCE
Reset your BONECO appliance to the factory settings
by pressing and holding the black button on the ap
-
pliance for approx. 30 seconds until the LEDs light
up in red. Now the BONECO appliance is in the same
state as when it was first started.