CONTROLS / SETTINGS
1. ON/OFF BUTTON Turns unit on and off.
A LOW – This is the most cost-effective set-
ting. Ideal for medium sized rooms, where
windows & doors rarely open.
B MED – Recommended for medium to large-
sized rooms.
C HI – This maximum output setting is recom-
mended for medium to large rooms and/ or
areas exposed to heavy dust.
D CLEAN – This red light goes on when your
Ionic Pro
®
Turbo ionic air purifier needs to
be cleaned, or the unit is experiencing some
other problem. See the “Trouble shooting”
section.
SELECTING SETTINGS
1. Press the ON/OFF button to activate your ionic air
purifier and get ready to enjoy clean, ionized air.
2. The Ionic Pro
®
Turbo ionic air purifier automati-
cally defaults to the HI (high/maximum output)
setting whenever the unit is turned on.
3. Just press the ON/OFF button one more time to
select the MED (medium) output setting and press
the ON/OFF button once again if you wish to select
the LOW output setting.
4. Press the ON/OFF button a fourth time to turn the
unit off.
5. The indicator LEDs light up to indicate your current
setting (LOW, MED, HI).
CLEAN LIGHT
The red CLEAN light will turn on and the unit will shut
down if cleaning is overdue or AC input is unstable. The
Ionic Pro
®
Turbo ionic air purifier’s collection blades
must be cleaned after every month of use and the
internal ionizing wires must be cleaned at the same
time. (See “Cleaning & Maintenance” for full direc-
tions.) Once the collection blades are properly cleaned,
normal operation should resume.
26
en
OPERATING THE IONIC PRO
®
TURBO AIR PURIFIER
To Next Page
Loading...
Need help?
General
