With very little effort, the Ionic Pro
®
Turbo ionic air
purifier delivers cleaner, fresher, healthier air to your
indoor environment. Keep your Ionic Pro
®
Turbo ionic
air purifier functioning properly by cleaning the collec-
tion blades after every month of use as recommended.
The internal ionizing wires are an important part of the
Ionic Pro
®
Turbo ionic air purifying system and need
to be cleaned at the same time or whenever you hear
excessive noise. (See “Cleaning internal ionizing wires”
and “About deep cleaning” sections.)
More frequent cleaning may be required if your Ionic
Pro
®
Turbo ionic air purifier is new or if you place it
in a different location. Exposing your Ionic Pro
®
Turbo
ionic air purifier to candle/oil lamp/fireplace soot and
smoke is not recommended and will require the col-
lection blades to be cleaned after every exposure. (See
“Important warnings”.)
CLEANING THE COLLECTION BLADES
1. Turn off and unplug your Ionic Pro
®
Turbo Ionic air
purifier.
2. Let the unit rest a minute before attempting to re-
move the collection blades.
3. Pull upward on the release latch of the collection
blade unit and pull out from the main door.
4. Remove the collection blade unit.
5. Do not touch the metal blades until after discharg-
ing residual electricity by touching blades to an
electrical ground such as a water pipe or metal
faucet.
6. Wipe away the trapped particles collected on the
three blades with a slightly damp sponge or cloth.
To avoid damaging your Ionic Pro
®
Turbo ionic
air purifier, make sure the blades are completely
dry and free of all moisture and that your Ionic
Pro
®
Turbo ionic air purifier is turned off before
re-insertion.
27
en
CLEANING & MAINTENANCE
To Next Page
Loading...
Need help?
General
