Boneco P340 User Manual

21
en
IONIZER
The ionizer is activated by pressing the “ION” button
once. Pressing the button again switches off the ionizer.
TIMER FUNCTION
The timer function lets you determine how long the
BONECO P340 should run before it switches off auto-
matically (OFF timer).
SETTING THE OFF TIMER
1. Switch on the BONECO P340 by pressing the
button.
2. Select the desired operating setting and the desired
comfort mode.
3. Press the
button once.
4. Use the button to set how long the appliance oper-
ates (1, 2, 4 or 8 hours).
The appliance runs for the specified period and is then
switched off.
5. In order to end the timer prematurely, keep the -but-
ton pressed until the timer switches off and the display
is indicated. Alternatively, you can switch off the
BONECO P340 using the button.
IONIZER AND TIMER FUNCTION

Boneco P340 Specifications

General

Noise level	- dB
Automatic mode	Yes
Air purify rate	230 m³/h
Number of speeds	3
Noise level (low speed)	42 dB
Noise level (high speed)	57 dB
Suitable for room area up to	23 m²
Suitable for room volume up to	57 m³
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	50 W
Placement	Desk, Floor
Product color	Black, White
Built-in display	-
Height adjustment	No
Filtering capability	Allergens, Cigarette smoke, Dust mites, Odors, Pollen, Viruses

Weight and Dimensions

Depth	336 mm
Width	206 mm
Height	527 mm
Weight	6300 g