Boneco P340 User Manual

22
en
REPLACING THE FILTER
The filter is used up when the “filter” indicator is
illuminated. The filter must now be replaced to continue
to ensure optimal air purification.
The procedure for replacing the filter corresponds to the
figures on page 17.
1. Replace the filter in accordance with the instructions
on page 17.
2. Press the -button for 5 seconds until the indicator
goes out.
CLEANING THE PRE-FILTER
The pre-filter prevents excessive dust accumulation from
getting inside the BONECO P340.
1. Clean the pre-filter under running water or using a
vacuum cleaner.
2. Allow the pre-filter to dry completely before you re-
insert it.
Do not use alcohol or corrosive cleaning agents for
cleaning.
CLEANING AND MAINTENANCE

Boneco P340 Specifications

General

Noise level	- dB
Automatic mode	Yes
Air purify rate	230 m³/h
Number of speeds	3
Noise level (low speed)	42 dB
Noise level (high speed)	57 dB
Suitable for room area up to	23 m²
Suitable for room volume up to	57 m³
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	50 W
Placement	Desk, Floor
Product color	Black, White
Built-in display	-
Height adjustment	No
Filtering capability	Allergens, Cigarette smoke, Dust mites, Odors, Pollen, Viruses

Weight and Dimensions

Depth	336 mm
Width	206 mm
Height	527 mm
Weight	6300 g