Boneco P340 User Manual

20
en
The BONECO P340 can easily be adapted to your needs.
During start-up of the appliance, the basic setting of the
fan level is in automatic mode (AUTO MODE).
“AUTO” MODE
In the mode the fan level is automatically regu-
lated depending on the air quality. After the appliance
is switched on for the first time, it runs for the first five
minutes at the lowest fan level “L”.
AIR QUALITY INDICATOR
The air quality is measured by the built-in sensor
and is visualized by different colors on the “air” display.
When the appliance is switched on, it takes around five
minutes until the sensor has measured the current air
quality. The “Air” display flashes during this period .
Please note that the measured values may change de-
pending on the size of the room and the position of the
appliance.
The sensor registers the smallest dirt particles and
gases. They include house dust, pollen, gases such as
tobacco smoke, organic compounds and odors.
MANUALLY CONTROLLING THE FAN LEVEL
The fan level of the BONECO P340 can be manually con-
trolled.
Push the button several times until the desired fan
level is attained.
Clean Acceptable Poor
BASIC FUNCTIONS

Boneco P340 Specifications

General

Noise level	- dB
Automatic mode	Yes
Air purify rate	230 m³/h
Number of speeds	3
Noise level (low speed)	42 dB
Noise level (high speed)	57 dB
Suitable for room area up to	23 m²
Suitable for room volume up to	57 m³
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	50 W
Placement	Desk, Floor
Product color	Black, White
Built-in display	-
Height adjustment	No
Filtering capability	Allergens, Cigarette smoke, Dust mites, Odors, Pollen, Viruses

Weight and Dimensions

Depth	336 mm
Width	206 mm
Height	527 mm
Weight	6300 g