15 / 32
IOM BX-BE-BN-MX-ME-M_eng - Translation of original instructions in Italian - Rev 02_0 - 30/09/16
BA
BA 60 BA 70 BA 80 BA 90 BA 100 BA 110 BA 140
T
Min 0.3 0.3 0.3 0.3 0.3 0.3 0.4
Max 0.7 0.7 0.7 0.7 0.7 0.7 0.8
BRAKE TYPE
T (mm) = Air gap
BA 60 5
BA 70 8
BA 80 18
BA 90 35
BA 100 50
BA 110 75
BA 140 150
7 DISASSEMBLY, RECYCLING OR DISPOSAL
The electrical motors are mainly made by ferrous, non - ferrous, plastic materials and electric / elec-
tronic devices.
Bonglioli recommends and encourages the end of life motor dismantling and the differentiation and
recycling of the components.
The differentiated disposal of the motor components shall be performed with respect to the local reg-
ulations for the environment protection.
For dismantled motors disposal, the European Waste Code (EWC) provides the following classication:
• 16 02 14 discarded equipment other than those mentioned in 16 02 09 to 16 02 13
• 16 02 16 components removed from discarded equipment other than those mentioned in 16 02 15
where:
• 16 02 09* transformers and capacitors containing PCBs
• 16 02 10* discarded equipment containing or contaminated by PCBs other than those mentioned in
16 02 09
• 16 02 11* discarded equipment containing chlorouorocarbons, HCFC, HFC
• 16 02 12* discarded equipment containing free asbestos
• 16 02 13* discarded equipment containing hazardous components other than those mentioned in
16 02 09 to 16 02 12
• 16 02 15* hazardous components removed from discarded equipment
* = concerning hazardous components - hazardous components are not present in Bonglioli electric motors.
NOTE: The above classication is referred to Bonglioli electric motors as per their factory initial con-
ditions. Bonglioli is not responsible for any particular or inappropriate usage or modications applied
to the electric motors, which might require a different EWC classication.
To Next Page
Loading...
Need help?
General
