INSERTING THE FILTER
To insert the selected filter in the porta-filter, make sure
to align the notch on the filter with the groove inside the
porta-filter.
Turn the filter to the left or right to lock in place. This will
help secure the filter in the porta-filter.
BEFORE THE FIRST USE
Pull out the water tank of the coffee maker. Pour water into water tank, the water level
should not exceed the “MAX” mark in the tank, then insert it into the coffee maker.
Note: The appliance is supplied with a removable tank for easy cleaning, you can fill
the tank with water firstly, and then insert the tank into the appliance.
Set steel mesh into metal funnel (no coffee in steel mesh), then put the metal funnel
under the metal funnel holder (see Fig.1), and turn it anticlockwise until it is fixed
tightly (see Fig.2 and Fig.3).
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with
warm water as following:
4
Metal funnel holder
Fig.1 Fig.2 Fig.3
Steam/Coffee
Pump
Power
Steam/Coffee
Pump
Power
Steam/Coffee
Pump
Power
To Next Page
Loading...
