BONTEC GWM01 - Supplied Parts and Hardware by Step; Parts for Step 2; Parts for Step 3; Parts for Steps 4 and 5

Supplied Parts and Hardware for Step 2
& Spacers [If needed] Washer
Note: The spacers are shown in
g_:_a\_g_c_:prdance with the actual size
Washer Spacer Spacer
D6 L13mm L5mm
M-D x4 M-E x4 M-F x4
Monitor Bolts [Only one bolt size fits your monitor]
Note: The bolts are shown in accordance with the actual size
M4
M6 x 16mm
M-C x4
Assembly/Wall Plate
[01] x1
Lag Screw
ST6.3x55mm
W-A x3
Washer
A\ W-B x3
Wall Anchor
o
@ =g M1 0x45mm
W-C x3
Supplied Parts and Hardware for Step 4 and Step 5
Large Allen Key
Bolt 15/64in.(6mm)
[ x1 T x1
Choose the Combination that Applies to Your VESA Hole
Pattern
200mm
(7.87 in.)
200mm ——
(7.87 in.)
200mm 100mm
(‘urgg)uwg,
(urye'e)wwioo
)
For VESA hole pattern:
2.95 inx2.95 in.(75x75mm)
3.94 in.x8.94 in.(100x100mm)
For VESA hole pattern:
7.87 in:x8.94 in.(200x100mm)
For VESA hole pattern:
7.87 inx7.87 in.(200x200mm)
04