Pan detection
The pan detection ensures a perfect safety.
The induction doesn’t work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case
it is impossible to increase the power and the display shows [ U ]. This symbol disappears when
a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking continues
with the power level chosen before.
Residual heat indication
After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched without danger.
As far as the residual heat indicator is on light, don’t touch the heating zone and don’t put any heat
sensitive object on them. There are risks of burn and re.
Booster function
The booster function grants a boost of power to the heating zone. If this function is activated
the heating zone works during 10 minutes with an ultra high power. The booster is foreseen for
example to heat up rapidly big quantities of water, like noodles cooking.
• Start up / Stop the booster function:
Action Control panel Display
Zone selection Press key [ + ] [ 4 ] to [ 9 ]
Increase power Press key [ + ] [ 1 ] to [ 9 ]
Start up the booster Press a second time key [ + ] [ P ] during 10 min
Stop the booster Press key [ - ] [ 9 ] …
Timer
The timer is able to be used with a time setting from 0 to 99 minutes.
• Setting and modication of the cooking time
Action Control panel Display
To select the heating zone Press key [ + ] or [ - ] [ 4 ] or [ 9 ]
To select the power level Press key [ + ] or [ - ] [ 1 ] … [ 9 ]
To select « Timer » Press key
[ ]
[ 00 ] minutes
Decrease the time Press key [ - ] [ 30 ] to 29,28,27,...
Increase the time Press key [ + ] The time increases…
After a few seconds the control light stops with blinking.
The time is conrmed and the cooking starts until the time reaches [ 00 ].
To Next Page
Loading...
