NL
FR
D
EN
75
Choosing the type of gas (5-burner version)
The hob can be confi gured for use with natural gas or LPG. To activate the gas selection proce-
dure the hob must be switched on with all of the burners off.
Press the “+” and “-” buttons simultaneously for approx. 3 seconds as shown in the fi gure above.
The burner level display will switch off and “Met” or “LPG” will appear on the timer display, depen-
ding on the current confi guration.
Select the desired setting using the “+” and “-” buttons.
To complete the procedure, press the timer button.
By activating this function, any other previously set burner switch off times will be cancelled.
Instructions for the installer
To Next Page
Loading...
