NL
FR
D
EN
77
Choosing the type of gas (4-burner version)
The hob can be configured for use with natural gas or LPG. To activate the gas selection proce-
dure the hob must be switched on with all of the burners off.
Press the “+” and “-” buttons simultaneously for approx. 3 seconds as shown in the figure above.
The burner level display will switch off and “Met” or “LPG” will appear on the timer display, depen-
ding on the current configuration..
Select the desired setting using the “+” and “-” buttons.
To end the procedure, press the timer button.
By activating this function, any other previously set burner switch off times will be cancelled.
You can repeat this procedure for all burners. To exit, turn the device off by pressing the
on / off button.
To Next Page
Loading...
