Bosch 1348AE - General Safety Rules; Work Area Safety; Personal Safety Precautions

3
Product Data - Angle Grinders
Model number 1347A 1348AE
Identification number 0 601 347 0 . . 0 601 348 7 . .
Max. wheel diameter 4 1/2" 5"
Spindle thread 5/8"-11 5/8"-11
Max. wire wheel 4" Dia. 4" Dia.
Max. wire cup brush 3" Dia. 3" Dia.
Max. sanding disc 5" Dia. 5" Dia.
Max. cut off wheel 4 1/2" Dia. 4 1/2" Dia.
Max. diamond wheel 4" Dia. 4" Dia.
Accessory Listing
Wheel Guard *
Grinding Wheel *
Side Handle *
Lock Nut *
Backing Flange *
Lock Nut Wrench *
( * = standard equipment)
Angle Grinder Components
1. Side Handle 8. Grinding Wheel
2. Air Vent 9. Lock Nut
3. Spindle Lock 10. Backing Pad
4. Spindle 11. Sanding Disc
5. Wheel Guard 12. Pad Lock Nut
6. Collar Screw 13. Wire Cup Brush
7. Backing Flange 14. ON/OFF Switch
WARNING! “READ ALL INSTRUCTIONS”.
Failure to follow the SAFETY RULES identi-
fied by the BULLET (•) symbols listed BELOW
and other safety precautions, may result in seri-
ous personal injury. Keep these operating
instructions with this product.
GENERAL SAFETY RULES
for all Power Tools
Work Area
• KEEP WORK AREAS CLEAN. Cluttered
areas and benches invite accidents.
• AVOID DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet locations.
Do not expose power tools to rain. Keep work
area well lit.
• AVOID GASEOUS AREAS. Do not operate
portable electric tools in explosive atmospheres
in presence of flammable liquids or gases. Mo-
tors in these tools normally spark, and the sparks
might ignite fumes.
• KEEP CHILDREN AWAY. Do not let visi-
tors contact tool or extension cord. All visitors
should be kept away from work areas.
Personal Safety
• GUARD AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded surfaces
such as pipes, radiators, ranges and refrigerator
BM 3609929584 7/01 7/26/01, 12:40 PM3