Bosch 3448 - Declaration of Conformity

Declaration of Conformity with the Machinery Directive 2006/42/EC,
Annex II 1A
Manufacturer: Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Authorised to Compile the
Technical Documents:
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Product name: Lifting tackle
Product type: Load holding device
Product number: 3448
We hereby declare that each product described above complies with the relevant clauses of the 2006/42/EC
Machinery Directive.
Any modification to a product not expressly approved by the manufacturer will void the validity of this declaration.
The following harmonised standards have been applied:
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk
reduction
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
Pollenfeld, 24 May 2018
Place, Date Matthias Wagner, Managing Director
en | 10 | 3448
2018-06-18 Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany