Bosch 4100DG-09 - Page 27

79
Toll Free: 877-BOSCH-99
Boschtools.com
U-shank Jig Saw Blades
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
3
U101D3
HCS 3-5/8 3 0.28 0.05
5-6
Progressive
5
U101D
HCS 3-5/8 3 0.28 0.05
5-6
Progressive
3
U101B3
HCS 3-5/8 3 0.28 0.05
10
Variable
Gullet
5
U101B
HCS 3-5/8 3 0.28 0.05
10
Variable
Gullet
3
U101BR3
HCS 3-5/8 3-3/16 0.28 0.05 10
5
U101BR
HCS 3-5/8 3-3/16 0.28 0.05 10
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
5
U111C
HCS 3-5/8 3 0.30 0.05 8
5
U19BO
HCS 2-3/4 2 0.15 0.04 12
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
3
U234X3
HCS 4-1/4 3-17/32 0.37 0.06
8-12
Progressive
5
U234X
HCS 4-1/4 3-17/32 0.37 0.06
8-12
Progressive
Application Wood
Ground teeth &
taper ground back
For curved cuts
Soft woods, OSB, plywood 5/64" - 3/4"
Wavy set & milled
Fast, coarse cuts, ideal for jig saws
without orbital action
Soft woods, OSB, plywood 3/16" - 2"
Side set & milled
Fast and clean through
thick and thin wood
Economical
Straight, fine, splinter free, accurate cuts
in thick or thin material
Hard / soft woods, laminated particleboard,
OSB, plywood, particleboard
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
5
U144D
HCS 4 3-3/16 0.30 0.05
5-6
Progressive
Straight & very fast cuts; plunge cuts
Hard / soft woods, OSB, plywood 1/4" - 2-3/8"
Side set & ground
Fast cuts
Use anti splinter guard for
splinter free cuts
Straight, fine cuts
Hard / soft woods, plastics, OSB, plywood,
laminated particleboard 3/16" - 1-1/4"
Ground teeth &
taper ground back
Reverse tooth for splinter-free cuts on top
of workpiece; straight, fine down cuts
Laminated particleboard, OSB, plywood,
hard / soft woods, plastics 3/16" - 1-1/4"
Ground teeth &
taper ground back
Straight, clean cuts
Hard / soft woods, plywood, OSB, plastics 1/4" - 2-3/8"
Ground teeth &
taper ground back
Fine, clean cuts
U 144 D
W 692 131 609 W 692 131 610
U 101 D
Grau 1
U 101 B
Grau 1