82
Boschtools.com
Toll Free: 877-BOSCH-99
U-shank Jig Saw Blades
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
5
U111HF
Bi-Metal
4 3-3/16 0.30 0.04
10
5
U211HF
Bi-Metal
3-5/8 3 0.18 0.04
10
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
3
U345XF3
Bi-Metal
5 4-7/32 0.39 0.05
5-10
Progressive
5
U345XF
Bi-Metal
5 4-7/32 0.39 0.05
5-10
Progressive
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
3
U118AF3
Bi-Metal
3-1/8 2-1/2 0.30 0.03
17-24
Progressive
5
U118AF
Bi-Metal
3-1/8 2-1/2 0.30 0.03
17-24
Progressive
5
U118GF
Bi-Metal
2-3/4 2 0.30 0.03
36
Application Metal* Cont’d.
Straight cuts & long life
Sheet metal 10-16 gauge, thin metals 1/16" - 1/8"
(ferrous and non-ferrous)
Wavy set & milled
Straight cuts & long life
Sheet metal 17-26 gauge, very thin metals
1/64" - 3/64" (ferrous and non-ferrous)
Wavy set & milled
For material thickness under 3/64"
use a thin piece of wood backing
Break resistant
and durable
U 118 AF
W 692 131 516 W 692 131 517
Application All Purpose
Progressive tooth design for fast cuts &
longer life in thick & thin materials
Wood with nails, plywood, particleboard 3/16" - 3-5/8",
metal 3/16" - 3/8", non-ferrous metal, aluminum 5/64" - 1-1/4"
Side set & milled
Straight cuts
Wood with nails, plastic 1/8" - 1-1/4", non-ferrous metal
and aluminum 1/8" - 1/2", metal 1/8" - 1/4"
Side set & milled
Fast curve cuts
Wood with nails, plastic 1/8" - 1-1/4", non-ferrous metal
and aluminum 1/8" - 1/2"
Side set & ground
Fast and clean cuts through
wood with nails and other
sandwich material
Application Special
File effect for fine straight or curved cuts
Ceramics, glass, fiberglass 3/64" - 5/8"
Coated
Fiberglass, ceramics
and glass
†
Cool with water – use only with GFCI protected outlets or adapter.
Package
Quantity Item # Material
Overall
Length (in.)
Working
Length (in.)
Blade
Height (in.)
Blade
Thickness (in.)
Teeth
Per Inch
1
U30RF1†
TC 2-3/4 2 0.31 0.03
30 GRIT
Carbide Grit
To Next Page
Loading...
