Bosch 600 Series - Configuration

Video Recorder 600 Series Configuration menu | en 69
Bosch Security Systems Installation and Operation manual F.01U.169.663 | v1.0 | 2010.09
6.6.5 Configuration
Figure 6.21 System - Configuration
– Import configuration will load previously saved system settings from a USB memory
device.
– Export configuration saves a copy of the system settings to a USB memory device.
– Select Factory defaults to reset the settings in the menu system to their default values.
– Update firmware checks a USB memory device when connected for a new version of the
unit software. Once started, the unit must not be powered off until the update is
completed.
– Quick install opens the Quick install menu that was first presented when the unit was
powered on when received from the factory.