Video Recorder 600 Series Technical specifications | en 87
Bosch Security Systems Installation and Operation manual F.01U.169.663 | v1.0 | 2010.09
10 Technical specifications
10.1 Electrical
Voltage and Power
Video
Audio
Alarm Handling
Control
Connectors
External power adapter AC input 100-240 VAC; 50/60 Hz; 1.8 A
External power adapter DC output 12 VDC; 5 A
DVR power input 12 VDC; 3.5 A; 145 BTU/h
Internal battery Lithium: CR2032. 3 V, 225 mAh
Inputs Composite video 1 Vpp, 75 ohm, automatic
termination PAL/NTSC auto-detect
Outputs Monitor A - VGA RGB
Monitor B - VGA RGB
Video standard SVGA
PAL/NTSC auto-detect or menu selectable
Resolution SVGA 800 x 600 (4:3), 1024 x 768 (4:3),
1280 x 1024 (5:4), 1366 x 768 (16:9), or
1440 x 900 (16:10)
AGC Automatic adjustment of gain for each video input
Digital Zoom 2 times
Compression H.264
Inputs Mono RCA, 1 Vpp, 10k ohm
Outputs Mono RCA, 1 Vpp, 10k ohm
Sample rate 16 kHz per channel
Compression ADPCM
Bit rate 8-bit
Inputs 8/16 configurable NO/NC
max. input voltage 15 VDC
min. input voltage -2 VDC
Outputs 4 relay outputs; configurable NO/NC max rated
30 VAC - 40 VDC - 0.5 A continuous or 10 VA
RS485 Output signals according to RS485
max. signal voltage -8 V to +12 V
RS485 support Bosch domes and Pelco-P and D
Keyboard Intuikey; 12 VDC, 400 mA max.
Video inputs 8/16 looping BNC, auto-terminating
Audio inputs 4 RCA (CINCH)
Ethernet RJ45, 10/100/1000BaseT according to IEEE802.3
To Next Page
Loading...
