Bosch 800 series - 14.2 Changing the basic settings; Home Connect

HomeConnect™ en-us
33
Basic setting Display
text
Selection Description
Remote Start rc1
1
rc0 - rc2 Activate or deactivate .
The following settings are
possible:
¡ With the setting "rc0",
the option is perma-
nently deactivated.
¡ With the setting "rc1",
the option can be se-
lected via the button.
¡ With the setting "rc2",
the option is perma-
nently activated.
Factory setting rE Starting with
YES
Confirming
with
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
1
Factory setting (may vary according to model)
14.2 Changing the basic
settings
1. Press ⁠.
2. To open the basic settings,
press for 3 seconds.
a The display shows Hxx.
a The display shows ⁠.
3. Press repeatedly un-
til the display shows the re-
quired setting.
4. Press repeatedly until the
display shows the right value.
You can change one or more
settings.
5. To save the settings, press
for 3 seconds.
HomeConnect™
15 HomeConnect™
HomeConnect™
This appliance is network-capa-
ble. Connecting your appliance to
a mobile device lets you control its
functions via the HomeConnect™
app.
HomeConnect™ services are not
available in every country. Avail-
ability of the HomeConnect™
function depends on the availabil-
ity of HomeConnect™ services in
your country. You can find infor-
mation on this at: www.home-con-
nect.com.
To be able to use HomeCon-
nect™, you must first set up the
connection to the WLAN home
network (Wi-Fi
1
) and to the
HomeConnect™ app.
¡ → "Connecting appliance to the
WLAN home network (Wi-Fi)",
Page34
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.