To Next PageTo Next Page
Need help?Do you have a question about the Bosch GCM 800 S and is the answer not in the manual?
General| Power input | 1400 W |
|---|---|
| No-load speed | 5500 rpm |
| Saw blade diameter | 216 mm |
| Weight | 13.5 kg |
| Saw blade bore diameter | 30 mm |
| Mitre setting | 47° L / 47° R |
| Bevel setting | 45° L |
| Type | Sliding Mitre Saw |
| Mitre angle range | 47° L / 47° R |
| Bevel angle range | 45° L |
| Max cutting width at 90° | 270 mm |
| Max cutting width at 45° | 190 mm |
Essential safety guidelines for power tools, covering work area, electrical, and personal safety aspects.
Specific safety precautions for sliding mitre saws, addressing workpiece, guards, and blade handling.
Explanation of important symbols and their meanings for safe power tool operation.
Lists and describes the various components and parts of the sliding mitre saw.
Provides key specifications, ratings, and dimensions for the sliding mitre saw.
Instructions for assembling the worktable and mounting the power tool securely.
Details on starting, stopping, transport safety, and safely handling the machine.
Guidance on securely clamping workpieces and adjusting horizontal/vertical cutting angles.
Instructions for various cuts, including slide movement, and maximum workpiece dimensions.
Procedures for setting depth stop, handling special workpieces, and aligning the fence.
Checking and adjusting angle indicators, fence alignment, and standard bevel angles.
Information on keeping the tool clean, maintained, and serviced for optimal performance.
Lists available accessories and spare parts for the power tool.
Contact information and resources for after-sales support, repairs, and spare parts.
Guidelines for environmentally friendly recycling of the machine, accessories, and packaging.
