English | 15
Bosch Power Tools 1 609 929 S54 | (8.12.08)
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Slide device
2 Transport handle
3 Blade guard
4 On/Off switch
5 Handle
6 Retracting blade guard
7 Saw table
8 Scale for mitre angle (horizontal)
9 Roller
10 Insert plates
11 Locking knob for various mitre angles
(horizontal)
12 Lever for mitre angle adjustment
(horizontal)
13 Angle indicator (horizontal)
14 Detents for standard mitre angles
15 Mounting holes
16 Holes for quick-action clamp
17 Extension bar*
18 Fence
19 Scale for bevel angle (vertical)
20 Angle indicator (vertical)
21 Sawdust ejector
22 Clamping lever for various bevel angles
(vertical)
23 Depth stop
24 Allen screws (6 mm) of the fence
25 Locking screw for slide device
26 Allen key (size 6 mm)/Phillips screwdriver
27 Transport safety-lock
28 Tilt protector
29 Tilt-protector lock nut
30 Metal bar of tilt protector
31 Dust bag
32 Locking lever
33 Phillips screw (attachment of retracting
blade guard)
34 Spindle lock
35 Allen screw (size 6 mm) for mounting of saw
blade
36 Clamping flange
37 Saw blade
38 Interior clamping flange
39 Quick-action clamp*
40 Wing bolt*
41 Threaded rod*
42 Depth stop lever
43 Screws for insert plate
44 Screw for angle indicator (horizontal)
45 Screw for angle indicator (vertical)
46 Allen screw (size 3 mm) for standard bevel
angle 0° (vertical)
47
Allen screw (size 3 mm) for standard bevel
angle 45° (vertical)
48 Recessed grips
49 Caps for carbon brushes
50 Carbon brushes
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
OBJ_BUCH-884-002.book Page 15 Monday, December 8, 2008 2:26 PM
To Next Page
Loading...
