Bosch GCM 8 SDE User Manual

Robert Bosch GmbH
Power Tools Division
70764 Leinfelden-Echterdingen
GERMANY
www.bosch-pt.com
1 609 92A 0Z4 (2015.03) PS / 396 EURO
GCM 8 SDE Professional
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
ar
fa
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ
OBJ_BUCH-2303-002.book Page 1 Tuesday, March 3, 2015 4:32 PM

Bosch GCM 8 SDE Specifications

General

Cutting capacity, 0°	70 x 312 mm
Cutting capacity, 45° mitre	70 x 214 mm
Cutting capacity, 45° incline	48 x 312 mm
Mitre setting	52° L / 60° R
Incline setting	47° L / 47° R
Saw blade diameter	216 mm
Saw blade bore diameter	30 mm
No-load speed	3, 500 – 5, 000 rpm

Summary

Safety

General Safety Warnings

Comprehensive safety guidelines for power tool operation, work area, electrical safety, and personal protection.

Mitre Saw Specific Safety

Detailed safety instructions tailored for the operation of mitre saws, covering workpiece handling and blade interaction.

Laser and Blade Safety

Precautions regarding laser usage and safe handling of saw blades to prevent injuries.

Technical Specifications

Technical Data

Provides essential technical specifications of the GCM 8 SDE Professional, including power, speed, and dimensions.

Noise and Vibration

Installation and Preparation

Mounting the Saw

Saw Blade Handling

Procedures for changing saw blades using hex socket screws and SDS bolts.

Operation and Adjustments

Angle Setting

Detailed instructions for setting standard and custom mitre and bevel angles for precise cuts.

Operating Procedures

Setting Angles and Positioning

Instructions for setting various mitre and bevel angles and positioning the workpiece.

Starting and Sawing

Sawing Techniques and Settings

Cutting Methods and Adjustments

Fine Adjustments and Precision

Basic Adjustment Checks

Setting Specific Angles