To Next PageTo Next Page
Need help?Do you have a question about the Bosch GCM 8 SJL and is the answer not in the manual?
General| Blade bore | 30 mm |
|---|---|
| Blade diameter | 216 mm |
| Idle speed (max) | 5500 RPM |
| Cutting depth (90º) | - mm |
| Compound cut capacity (45° x 45°) | 70 x 214 mm |
| Saw blade included | Yes |
| Input power | 1600 W |
| Power source | AC |
| Miter cut | 51 - 60 ° |
| Diamond disc | - |
| Uncertainty K | 1.5 m/s² |
| Vibration emission | 2.5 m/s² |
| Cross stop tilt angle range | 47 - 2 ° |
Weight and Dimensions| Depth | 910 mm |
|---|---|
| Width | 460 mm |
| Height | 410 mm |
| Weight | 17300 g |
Essential safety precautions for operating electric tools to reduce risks.
Guidelines for maintaining a safe and clean work environment.
Precautions related to electrical connections and avoiding shock.
Recommendations for operator alertness, protective equipment, and attire.
Instructions on maintaining the power tool through qualified repair.
Information and precautions regarding the laser warning label.
Key safety rules for operating the sliding mitre saw.
Explanation of important symbols used on the power tool.
Defines the purpose and applications of the power tool.
Lists and identifies the main components of the power tool.
Details on suitable saw blade dimensions and compatibility.
Lists the components included with the power tool.
Instructions for stationary and flexible mounting of the machine.
Guidelines and procedures for dust and chip removal.
Step-by-step guide for replacing the saw blade.
Procedures for securing and releasing the machine for transport and use.
Methods for securing workpieces and adjusting the fence.
Instructions for setting standard and custom mitre and bevel angles.
Detailed steps for setting standard and arbitrary bevel angles.
How to safely start and stop the power tool.
General sawing tips, cutting line marking, and workpiece size limits.
Guide on how to replace worn insert plates.
Instructions for performing cuts with and without the slide function.
Using material stops and adjusting the depth stop for grooves.
Procedures for checking and adjusting machine alignment and the laser.
Steps to calibrate bevel and mitre angle scales for accuracy.
How to prepare the machine for safe transport.
Guidelines for routine maintenance and cleaning of the tool.
List of optional accessories and their article numbers.
Contact details for service, spare parts, and application support.
