To Next PageTo Next Page
Need help?Do you have a question about the Bosch GCM 8S Professional and is the answer not in the manual?
General| Type | Mitre saw |
|---|---|
| Power Input | 1600 W |
| No-load Speed | 5500 rpm |
| Blade Diameter | 216 mm |
| Saw blade bore diameter | 30 mm |
| Max Cutting Depth at 90° | 70 mm |
| Max Cutting Width at 90° | 312 mm |
| Bevel setting | Left |
Guidelines for maintaining a safe and clean work environment.
Precautions for safe use of electrical power tools.
Recommendations for personal protection and alertness while operating tools.
Warning about laser safety class 2 and exposure.
Importance of clamping workpieces securely for safe operation.
Warning against operating the machine with damaged cables.
Guidelines for using and maintaining saw blades safely.
Importance of secure clamping and correct material usage.
Strict rules for safe laser beam usage and child supervision.
Do not direct laser beam at persons or animals.
Mandatory use of safety goggles, hearing protection, and dust respirator.
Keep hands, fingers, or arms away from this area.
Description of the power tool's intended applications and capabilities.
Listing and numbering of the main components of the power tool.
Details on noise and vibration levels during operation.
Specifications for saw blades compatible with the machine.
Instructions for assembling the tool and applying warning labels.
Guidance on mounting the machine securely for operation.
Methods and importance of dust and chip removal during operation.
Step-by-step guide for safely removing and installing saw blades.
Using the transport safety-lock and moving the machine.
Methods for securing workpieces and setting cutting angles.
Procedures for switching the tool on/off and general sawing advice.
Utilizing the laser for precise cutting line indication.
Safety guidelines for hand placement during operation.
Instructions for sawing wide workpieces and setting depth stops.
Advice for special workpieces and replacing insert plates.
Specific instructions for sawing floor strips and mouldings.
Instructions for sawing ceiling strips using US standard settings.
Steps for adjusting the laser guide for precise cutting.
Procedure for aligning horizontal and vertical angle indicators.
Procedure for aligning the fence parallel to the saw blade.
Procedure for setting standard 0° and 45° vertical bevel angles.
Instructions for safely transporting and cleaning the machine.
Instructions for checking and replacing carbon brushes.
List of accessories and contact for service support.
Guidelines for the environmentally friendly disposal of the machine.
