To Next PageTo Next Page
Need help?Do you have a question about the Bosch GCM 80 SJ Professional and is the answer not in the manual?
General| Laser Guide | Yes |
|---|---|
| Saw blade diameter | 216 mm |
| Saw blade bore diameter | 30 mm |
| Type | Mitre saw |
| Power Input | 1600 W |
| Bevel setting | 47° left / 47° right |
Ensuring a clean and well-lit workspace and keeping children and bystanders away.
Precautions regarding plugs, earthed surfaces, rain/wet conditions, and damaged cords.
Staying alert, using PPE, and avoiding distractions for safe tool operation.
Guidelines for proper tool operation, maintenance, and storage to prevent accidents.
Importance of qualified repair and using identical replacement parts for maintaining safety.
Key safety instructions for operating the sliding mitre saw, including workpiece handling and blade use.
Explanation of important safety symbols used in the manual for user protection.
Defines the primary purpose and capabilities of the power tool for cutting wood, plastic, and metal.
Lists and describes the components and parts of the power tool with corresponding numbers.
Provides technical specifications for different models of the sliding mitre saw.
Specifies the required dimensions for saw blades compatible with the machine.
States the product's compliance with relevant EU directives and standards.
Details sound emission and vibration levels of the power tool.
Lists the components included in the package with the power tool.
Guidance on mounting the tool to a surface or stand for stable operation.
Procedures and precautions for managing dust and chips during operation.
Instructions for connecting a vacuum hose for dust extraction.
Step-by-step guide for safely replacing the saw blade.
Detailed steps for safely removing the saw blade from the machine.
Detailed steps for safely mounting a new saw blade onto the machine.
Instructions for installing the oil damper for specific cutting operations.
Information on using the transport safety lock for easier handling.
Steps to release the tool arm from its transport position.
Instructions on how to move the adjustable fence for specific angle cuts.
Guidance on securely clamping the workpiece for safe and precise cuts.
Information on checking and adjusting the machine's cutting angles for precision.
Steps for setting the horizontal mitre angle within its range.
Steps for setting the vertical bevel angle within its range.
Key steps to follow before and during the initial startup of the machine.
Instructions on how to turn the power tool on and operate it.
How to safely turn off the power tool.
Essential advice for performing cuts safely and effectively with the saw.
Guidelines for safe operator positioning relative to the saw blade.
Details on the maximum and minimum workpiece sizes for safe cutting.
Instructions on how to replace worn insert plates on the saw table.
Procedure for performing cuts on small workpieces without using the slide function.
Procedure for cutting wider workpieces using the slide device.
Advice on securely cutting curved or round workpieces.
Procedure for checking and adjusting the machine's basic settings for precision.
Instructions for setting and verifying the 0° vertical bevel angle.
Guidelines for keeping the power tool clean and functional.
Specific advice for cleaning the tool and its parts for safe operation.
List of available accessories with their corresponding article numbers.
Information on contacting Bosch for service, repairs, and spare parts.
How to verify the accuracy of the 45° vertical bevel angle setting.
Steps to adjust the 45° vertical bevel angle for precise cuts.
How to verify the alignment of the horizontal angle indicator.
Steps to adjust the horizontal angle indicator to the correct position.
Steps to prepare the machine for safe transport.
Instructions for environmentally friendly disposal of the machine and accessories.
