To Next PageTo Next Page
Need help?Do you have a question about the Bosch GCM 800 SJ Professional and is the answer not in the manual?
General| Input power | 1400 W |
|---|---|
| Power source | AC |
| Blade bore | 30 mm |
| Blade diameter | 216 mm |
| Idle speed (max) | 5500 RPM |
| Miter setting (left) | 47 ° |
| Bevel setting (right) | 0 ° |
| Cutting capacity 0° | 70 x 270 mm |
| Cutting capacity 45° miter | 70 x 190 mm |
| Cutting capacity 45° incline | 48 x 270 mm |
Weight and Dimensions| Width | 445 mm |
|---|---|
| Height | 630 mm |
| Weight | 13500 g |
Covers warnings related to work area, electrical precautions, and personal safety for power tool operation.
Guidelines on proper usage, maintenance, and safe handling of power tools to ensure longevity and safety.
Specific safety instructions and warnings for operating sliding mitre saws to prevent injury.
Details the specific applications and purpose for which the power tool is designed.
Lists and describes the main components and parts of the power tool for identification.
Specifies the required diameter, body thickness, and mounting hole diameter for saw blades.
Provides sound emission and vibration level data for the power tool as per safety standards.
Step-by-step instructions for safely removing and mounting saw blades on the tool.
Information on checking and adjusting the machine's basic settings for precise cuts.
Steps to set the horizontal mitre angle of the saw table within its range.
Steps to set the vertical bevel angle of the tool arm within its range.
Instructions on how to safely start the power tool, ensuring correct voltage and switch operation.
