Bosch Active Line User Manual

54
Error messages
Error messages
Display Error source Measure
410 /418 Button(s) blocked Check the buttons and clean them if necessary.
414 Control computer connection Check the cable connections and contacts (visual check).
419 Configuration Restart the e-bike.
422 Drive unit connection Check the cable connections and contacts (visual check).
423 Rechargeable battery connection Check the cable connections and contacts (visual check).
424 Communication Check the cable connections and contacts (visual check).
426 Internal timeout Restart the e-bike (see chapter “Operation > E-bike”).
430 The control computer's rechargea-
ble battery is e.g.
Read the chapter “Operation > Control computer”.
431 Software version Restart the e-bike.
440 Drive unit Restart the e-bike.
450 Software Restart the e-bike.
460 USB port Remove the cable from the control computer.
490 Control computer Consult a specialist dealer.
500 Drive unit Restart the e-bike.
502 Lighting Check the components of the lighting and their connection (visual check).
503 Speed sensor Restart the e-bike.
510 Internal sensor Restart the e-bike.
511 Drive unit Restart the e-bike.
530 Rechargeable battery 1) Switch the e-bike off.
2) Remove the rechargeable battery and check it with the
button.
3) If the rechargeable battery is charged, insert it and start the e-bike.

Bosch Active Line Specifications

General

Rated Power	250 W
Max Torque	40 Nm
Weight	3.2 kg
Maximum Assistance Speed	25 km/h
Operating Voltage	36 V
Walk Assistance	Yes
Battery Compatibility	Bosch PowerPack
Display Compatibility	Bosch Purion, Intuvia