Need help?Do you have a question about the Bosch AW 4 OR-S and is the answer not in the manual?
Explains the meaning of signal words and symbols used in warnings.
Provides essential safety guidelines for installation, operation, and maintenance.
Lists components included in the standard delivery package of the heat pump.
States compliance with British and European legislation, indicated by UKCA/CE markings.
Details the intended use and connection of AW OR heat pumps with indoor units.
Lists optional accessories recommended for installation and enhanced functionality.
Provides a visual overview of the heat pump's main components with numbered labels.
Lists applicable directives and regulations for installation and operation of the heat pump.
Presents the physical dimensions of the heat pump and connection points.
Defines required safety clearances around the heat pump due to refrigerant properties.
Provides guidelines for safe handling, transportation, and storage of the heat pump.
Details criteria for selecting a suitable outdoor installation location, considering access and noise.
Specifies recommended minimum clearances between the heat pump and surrounding objects.
Emphasizes the importance of water quality for system efficiency and longevity.
Outlines specific parameters and limit values for heating water quality.
Specifies the necessary system water volume for optimal heat pump performance and cycle management.
Provides a step-by-step checklist for the installation process.
Details procedures for securely mounting the heat pump on a surface or stand.
Explains how to mount the heat pump using an optional floor stand for increased clearance.
Describes mounting options using specific installation kits for ground or wall placement.
Guides the assembly and mounting of the outdoor unit on a wall bracket.
Provides detailed drawings for creating a foundation for the heat pump without a floor stand.
Covers general guidelines for connecting pipes, including material and insulation requirements.
Explains the procedure and requirements for installing the condensate drain system.
Details the process of connecting the heat pump to the indoor unit via heat transfer pipes.
Covers CAN-BUS communication setup and potential malfunctions due to incorrect connections.
Guides the connection of the heat pump to the power supply and communication network.
Provides instructions for cleaning the heat pump's drip tray.
Presents detailed technical specifications and performance data for the heat pump models.
Illustrates the operating ranges for heating and cooling modes without a booster heater.
Shows a diagram of the refrigerant circuit and lists all components.
Displays the electrical wiring diagrams for the heat pump and its components.
A form to record installation and commissioning details for warranty validation.
To Next Page
General