Need help?Do you have a question about the Bosch Compress 7001i AW and is the answer not in the manual?
General| Type | Air-to-water heat pump |
|---|---|
| Refrigerant | R410A |
| Operating temperature range (Heating) | -20°C to 35°C |
| Energy Efficiency Class (Heating) | A++ |
| Noise Level (Outdoor Unit) | 42 - 62 dB(A) (depending on model) |
| Weight (Outdoor Unit) | 210 kg |
| Dimensions (Outdoor Unit) | 1620 x 1180 x 820 mm |
Explains the meaning of warning signal words used in the document.
Covers application area, electrical safety, inspection, room air, frost, and scalding risks.
Details the location and information found on the appliance's type plate.
States compliance with European and national requirements and CE marking.
Describes the outdoor unit, its inverter operation, fan control, and defrosting process.
Defines the operating limits of the heat pump concerning outdoor temperatures.
Provides a functional overview of the refrigerant circuit within the heat pump.
Explains the function of the indoor unit in heat distribution and its RPM-controlled circulation pump.
Offers advice on how to optimize energy consumption for heating and hot water.
Describes the user interface for controlling heating circuits and operating modes.
Introduces the control panel, its buttons, and the standard display layout.
Details the functions of control buttons and explains symbols displayed on the unit.
Outlines the procedure to temporarily switch off the system for maintenance or cleaning.
Explains how to choose which heating circuit is shown on the standard display.
Guides on activating automatic or optimized operating modes for heating circuits.
Describes how to adjust the room temperature temporarily, overriding the time program.
Explains how to change the room temperature permanently for optimized operation.
Details how to set up and customize time programs for automatic heating control.
Guides on activating a specific time program for the heating system.
Explains how to rename pre-assigned time programs and heating circuits for easier identification.
Covers settings for domestic hot water production, including operating modes and extra charging.
Provides instructions on configuring a holiday program to manage heating and DHW during absences.
Covers additional settings like time/date, key block, and favorite functions configuration.
Details settings related to heating operation modes, temperature levels, and time programs.
Explains how to set the switchover threshold between summer and winter operating modes.
Describes how the system alternates between DHW heating and heating based on priority settings.
Covers operating modes for DHW, time programs, and activating extra hot water.
Explains the process and safety precautions for thermal disinfection to prevent Legionella.
Details settings for the ventilation system, including operating modes and air quality.
Guides on setting up holiday programs, including dates and system selection.
Covers settings for optional systems like pool heating, smart grid, PV systems, and energy managers.
Includes settings for display language, time/date formats, and contrast.
Explains how to access and view system information and operating conditions via the info menu.
Provides information on how to view active faults and what to do if a fault persists.
Details checks for system pressure, particle filter, overheating protection, and pressure switch in the indoor unit.
Covers handling moisture in cooling mode and checking the safety valves for the indoor unit.
Outlines inspection and cleaning tasks for the outdoor unit including casing, evaporator, snow/ice, and condensation catch pan.
Explains how to connect the IP module for system control via mobile device and internet.
Provides details on the refrigerant used, its properties, and compliance with regulations.
Discusses environmentally compatible recycling of packaging, used appliances, and old electronics.
Outlines how personal data is processed and rights regarding data protection.
Defines key technical terms used throughout the manual for better understanding.
Lists available menu items for controlling heating and cooling functions.
Lists available menu items for domestic hot water settings.
Lists available menu items for configuring the ventilation system.
Covers menu items related to pool heating and holiday program configuration.
Lists menu items for smart grid, photovoltaic, and energy manager configurations.
Lists menu items for general settings like language, time, and display.
Displays current status and parameters for heating, DHW, ventilation, and pool operations.
Provides system status, operating data, energy consumption, and supply information.
Lists information regarding solar yield, outdoor temperature, and internet connection status.
To Next Page
