Bosch B4512 - Quick Commands

26
en | Quick commands Control panels
2018.07 | 01 | F.01U.352.527 Bosch Sicherheitssysteme GmbH
5
Quick commands
How to operate quick commands with B94x / B93x / B92x /
B91x
1. Press [CMD] + one or two digits as shown in the table below.
2. Enter your passcode.
3. Press [ENTER].
P The quick command is executed.
Action Quick command
All arm, delay [CMD]+1
All arm, instant [CMD]+1+1
Part arm, delay [CMD]+3
Part arm, instant [CMD]+2
Bypass [CMD]+0
Unbypass [CMD]+0+0
Silence troubles [CMD]+4
See alarms [CMD]+4+0
Add user [CMD]+5+6
Delete user [CMD]+5+3
Change passcode [CMD]+5+5
Watch mode [CMD]+6