Control Panels Appendix | en 145
Bosch Security Systems, Inc. Installation Manual 2018.07 | 16 | F.01U.287.180
2. Copy and paste or type the text shown below the instructions.
3. Save the file as AutoIP.reg to a location on the RPS or Installer Services Portal
programming tool computer that you can easily find.
4. Use Windows Explorer to find the saved file. Double-click the file to add it to the
computer registry.
5. Restart the RPS or Installer Services Portal programming tool computer.
Text for the AutoIP.reg file:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
"IPAutoconfigurationEnabled"=dword:00000001
To Next Page
Loading...
