Bosch B9512G - Page 154

154
en | B92x/B91x Actions menu Control Panels
2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
26.3.2 Send Test Report
This function tests the communication link between your security
system and your security company. It is an important part of
maintaining a high level of security for your property.
You can either send a normal test report or a custom test report:
– Normal test report: Includes all route groups that have the test
report function enabled, independent of which destination device is
used to communicate. The test report is sent to the first successful
destination device in a route group.
– Custom test report: You can select the route group and destination
device you want to test. You can either test one destination device
per route group or all configured destination devices for a route
group.
Sending a normal test report:
1. Open the Main Menu.
2. Use NEXT to go to the Actions menu option, and press ENTER, or
press [3].
3. Use NEXT to go to the Test menu option, and press ENTER, or
press [3].
4. Use NEXT to go to the Test Report menu option, and press ENTER.
5. Use NEXT to go to the Normal Test menu option, and press ENTER.
6. Enter your passcode and press ENTER.
The system sends a normal test report.
7. Press ESC to exit the menu
Sending a custom test report:
1. Open the Main Menu.
2. Use NEXT to go to the Actions menu option, and press ENTER, or
press [3].