Control Panels B92x/B91x Actions menu | en
163
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
26.7 Service Bypass
To facilitate system maintenance for service personnel, your security
system comes with a special point bypass option to remove any point
from service. Bypassed points are not protected. Use this menu to view
bypassed points.
Viewing points in Service Bypass:
1. Open the Main Menu.
2. Use NEXT to go to the Actions menu option, and press ENTER, or
simply press [3].
3. Use NEXT to go to the Service Bypass menu option, and press
ENTER, or simply press [6].
4. Enter your passcode and press ENTER. The keypad shows any
points in service bypass.
To Next Page
Loading...
