Control Panels B94x/B93x Users menu | en
97
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
Configuring the user’s name:
1. Press Name to configure the user’s name.
2. The B94x offers a qwerty keyboard. For a B93x, press a number key
repeatedly to scroll through the number and letters shown on the
key. To enter a space, press [0][0]. To capitalize a letter, press
CMD before you enter the letter. For caps lock, press CMDCMD. To
remove caps lock, press CMDCMDCMD.
3. Press ENTER to save the name. The keypad returns to the previous
menu.
Configuring the user’s level:
1. Press Level to assign an authority level.
2. Press ENTER to continue.
3. Press Yes to change the default authority level for area 1.
4. Enter the authority level number (1 - 14) you wish to apply to the
user and press ENTER. The keypad shows Level configured and
returns to the previous menu.
5. If your security system has more than one area, use NEXT and the
previous two steps to set the levels for the additional areas.
To Next Page
Loading...
