5
Included in the box
u BCC110 Wi-Fi Thermostat
u Screws (2) and Anchors (2)
u Flathead Screwdriver
u Wire Labels
u Jumper Wire
u User Guide
u Customer Support Card
Tools you will need
u Medium Phillips screwdriver
(for attaching the Wall Plate to the wall)
u Smartphone
(for taking pictures of the existing wiring)
u Bosch EasyAir app
(For registering your device)
Tools you may need
u Needle-Nose Pliers (for pulling wires from the wall)
u Drill with 7/32” Drill Bit (for mounting wall anchors)
u Wire Stripper (for cutting and stripping wires)
u Multimeter (for testing circuit power and continuity)
u Pen or Pencil (for preventing wires from falling into the wall)
Installation Overview
Once you have everything you need, let’s get started!
To Next Page
Loading...
