35
Thermostat Overview
Unit Operating Mode
Heat: The thermostat cycles your heating appliance to maintain your scheduled heating set point.
Cool: The thermostat cycles your cooling appliance to maintain your scheduled cooling set point.
Auto: The thermostat cycles your heating/cooling appliance to maintain your scheduled heating/cooling set points.
Off: The thermostat turns off all heating/cooling functions. You can still manually operate the fan in this mode.
Emergency Heat (available only with Heat Pumps): The thermostat turns off all compressor stage(s) and activates
the back-up electric heat source(s).
Fan Operation
Auto: Fan will follow heating and cooling operations.
On: Fan runs non-stop.
Circulation: Fan cycles on and off regularly in addition to
heating and cooling operations. By selecting this option, you
also need to define the operation length of time and schedule
for the circulation.
To Next Page
Loading...
