Installation instructions
29
Fit the feet.
Push the appliance in fully.
Do not kink or trap the connection cable, or route it
over sharp edges.
Check the clearance to the adjacent appliances.
When opening the appliance door, the appliance
may tilt forwards.
▶ Hold the appliance in position when opening the
appliance door.
Open the appliance door slowly.
Screw the appliance to the unit on the opposite side
to the hinges.
Pre-drill the screw holes in the unit on the side with
the hinges.
Cover the door hinges.
Use a wood drill with a 2 mm diameter.
Remove any shavings from the cooking compart-
ment.
To Next Page
Loading...
