1 689 975 210 2008-11-07| Robert Bosch GmbH
Servicing | BEA 460 | 1�BEA 460 | 1� | 1� en
Servicing3.
Mandatory calibration3.1
The regulations governing the calibration of exhaust- !
gas analyzers in the specific country of use must be
complied with. The owner of the BEA is responsible
for compliance with calibration laws and for regular
service and maintenance.
Period
At half-yearly intervals the BEA must be serviced by
expert, instructed persons. If an official test seal is bro-
ken during such work, proper and expert repair must
be performed and confirmed by the authorized Service
Agent and a new calibration undertaken by the respon-
sible calibration authorities.
Documentation required
Service work must be recorded in writing, including the
following information:
Time of service R
Type of service work undertaken R
Name of person or company performing the work R
These records must be preserved for the duration of
five years. The Operating Instructions must be kept
with the BEA so that they are available at all times.
Trouble-shooting and 4.
maintanance
The trouble-shooting and maintanance are iden- i
tical to the BEA 450. Use for trouble-shooting
and maintanance the maintanance instructions
1 689 975 165, chapter 2 and chapter. 4 to 10.
The structure of the maintanance instructions is at i
present in the revision. The new structure will be
introduced with the next actualization of the main-
tanance instructions..
To Next Page
Loading...
