en Basic settings
14
Basic settings
11 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Your changes to the basic settings will be retained
for some time even after a power cut.
Basic settings Selection
Language See selection on the ap-
pliance
Time "Time" in 24-hour format
Display Selection
Brightness ¡ Settings 1 to 8
1
Standby screen ¡ On (this setting in-
creases energy con-
sumption)
¡ Clock displayed, for
set time
1
¡ Off
Clock ¡ Digital
1
¡ Analog
Adjustment ¡ Align the display hori-
zontally and vertically.
1
Factory setting (may vary according to model)
Sound Selection
Button tone ¡ On
1
¡ Off
Signal tone ¡ Very short
¡ Short duration
¡ Medium duration
1
¡ Long duration
1
Factory setting (may vary according to model)
Appliance settings Selection
Illumination ¡ On
1
¡ Off
Microwave output selec-
tion
¡ 90W
¡ 180W
¡ 360W
¡ 600W
¡ boost
1
Factory setting (may vary according to model)
Customisation Selection
Brand logo ¡ Display
1
¡ Don't display
Operat. after switch-on ¡ Main menu
1
¡ Microwave
¡ Meals
Childproof lock ¡ Available
¡ Deactivated
1
Factory setting (may vary according to model)
Factory settings Selection
Factory settings ¡ Restore
¡ Cancel
Appliance information ¡ Displaying "Appliance
information"
11.2 Changing the basic settings
Requirement:The appliance is switched on.
1.
Press "Basic settings".
2.
Press the required basic setting.
3.
Change the required settings on the display.
4.
Use to return to the overview or go back to the
main menu.
11.3 Changing the time
Requirement:The appliance is switched on.
1.
Press "Basic settings".
2.
Press the "Time" basic setting.
a The display shows the set value.
3.
Use the setting ring to set the hours.
4.
Press the minutes.
5.
Use the setting ring to set the minutes.
6.
Press .
7.
Use to return to the overview or go back to the
main menu.
Cleaning aid
12 Cleaning aid
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by evaporating the soapy water. It is then
easier to remove the dirt.
ATTENTION!
Incorrect cleaning may damage the appliance.
▶ Never pour liquid into the cooking compartment.
12.1 Setting the cleaning aid
Requirement:The appliance is switched on.
1.
Press "Cleaning".
2.
Follow the instructions on the display.
3.
Press .
a A signal tone sounds once the time has elapsed.
4.
Follow the instructions on the display.