Operating the appliance en
15
Note: The washing temperature is
lower than the selected temperature.
For special hygiene requirements, we
recommend selecting a higher
temperature or the G Speed option.
p Easy-Iron
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry slightly
increased.
O Rinse plus*
Extra rinse. For areas with very soft
water or to further improve the rinsing
result.
Z Water plus*
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or to further
improve the rinsing result.
(* depending on model)
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected
(from ~ Page 29).
1. Connect the mains plug.
2. Turn on the water tap.
3. Open the washing machine door.
4. Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note: If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
~ Page 17
Use the programme selector to select
the required programme. Can be turned
in both directions.
The machine is switched on.
The programme duration appears on
the display panel.
Change the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
Note: All buttons are sensitive and only
need to be touched lightly. If the buttons
are held for longer, the appliance
automatically runs through the setting
options.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
Programme default settings
~ Page 14
Overview of programmes from
~ Page 12
To Next Page
Loading...
Need help?
General