Positioning and connecting en
29
5 Positioning and
connecting
Positioning and connecting
Included with the appliance
Notes
■ Check the machine for transport
damage. Never use a damaged
machine. If you have a complaint,
please contact the retailer from
whom you purchased the appliance,
or our after-sales service.
■ Moisture in the drum is due to the
final inspection.
In addition, a hose clamp (24-40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
■ Spirit level for levelling
■ Spanner with:
– WAF 13 for loosening the
transport locks, and
– WAF 17 for aligning the
appliance feet
Safety instructions
:Warning
Risk of injury!
■ The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■ If the washing machine is lifted by
protruding components (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■ If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may crack/burst.
Do not install the washing machine in
areas exposed to frost and/or outdoors.
( Mains cable
0 Water supply hose on Aqua-Stop models
8 Bag*:
■ Installation and operating instructions
■ After-sales service location directory*
■ Warranty*
■ Cover caps for openings left after
removing the transport locks
■ Spanner*
@ Water drain hose
H Elbow for securing the water drain hose*
P Water supply hose on standard/Aqua-
Secure models
* depending on the model
#
+
3
To Next Page
Loading...
Need help?
General