en Setting the signal
20
M Setting the signal
Setting the signal
2 Cleaning and
maintenance
Cleaning and maintenance
:Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and unplug the
mains plug.
:Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
■ Wipe the housing and the control
panel with a soft, damp cloth.
■ Do not use any abrasive cloths,
scourers or cleaning agents
(stainless steel cleaners).
■ Remove the detergent residue
immediately.
1. Activate the setting mode for the signal volume
Set to Ú One step, the display
panel lights up
Select and hold One step, release
2. Set the volume for the button signals and information signals (depending on the model)
* you may need to
select the function sev-
eral times.
Set the vol-
ume*
skip One step Set the volume* Set to Ú
To Next Page
Loading...
Need help?
General